In its “S” evolution, the TDX continues its technical development while retaining its foundation: a chassis entirely made from 32 mm diameter chrome-molybdenum steel tubing, available in Direct Drive, Shifter and DD2 configurations. The Model Year 2027 brings important updates, including HFT and HFZ stub axles, a new 180 mm floating brake disc and, for the geared version, a new chain tensioner. These solutions are part of a project developed in line with the high-quality standards that define OTK Kart Group production.
In its “S” evolution, the TDX continues its technical development while retaining its foundation: a chassis entirely made from 32 mm diameter chrome-molybdenum steel tubing, available in Direct Drive, Shifter and DD2 configurations. The Model Year 2027 brings important updates, including HFT and HFZ stub axles, a new 180 mm floating brake disc and, for the geared version, a new chain tensioner. These solutions are part of a project developed in line with the high-quality standards that define OTK Kart Group production.
The TDX S joins the TG17 TS, the benchmark model in the Gillard Kart range, and shares its main technical solutions while retaining as its distinctive feature a chassis entirely made from 32 mm diameter tubing. In terms of components, the model introduces HFT and HFZ stub axles for the Direct Drive and Shifter versions respectively, together with the new 180 mm floating brake disc and, for the geared version, the new chain tensioner. The M11 bodywork and BWD and BWZ braking systems remain unchanged.
The TDX S joins the TG17 TS, the benchmark model in the Gillard Kart range, and shares its main technical solutions while retaining as its distinctive feature a chassis entirely made from 32 mm diameter tubing. In terms of components, the model introduces HFT and HFZ stub axles for the Direct Drive and Shifter versions respectively, together with the new 180 mm floating brake disc and, for the geared version, the new chain tensioner. The M11 bodywork and BWD and BWZ braking systems remain unchanged.
The TDX’s “S” evolution introduces two different front-end solutions: HFT stub axles for the Direct Drive configuration and HFZ stub axles for the Shifter version. Both components have been developed to make the kart’s response more immediate and help drivers better read its behaviour. This update contributes to improved drivability and allows the chassis to perform with greater versatility as track conditions change.
The TDX’s “S” evolution introduces two different front-end solutions: HFT stub axles for the Direct Drive configuration and HFZ stub axles for the Shifter version. Both components have been developed to make the kart’s response more immediate and help drivers better read its behaviour. This update contributes to improved drivability and allows the chassis to perform with greater versatility as track conditions change.
Designed specifically for single-speed classes, the BWD braking system is one of the distinctive features of the TDX S Direct Drive configuration. Its key features are the master cylinder and brake caliper, both made from very high-quality materials carefully selected by OTK Kart Group’s R&D Department to improve heat dissipation, significantly reduce brake-fluid temperature and provide drivers with consistent braking feel. One of the updates introduced with the “S” evolution is the adoption of a 180 mm floating brake disc, which makes braking more effective and consistent over time while also helping to reduce brake pad wearing.
Designed specifically for single-speed classes, the BWD braking system is one of the distinctive features of the TDX S Direct Drive configuration. Its key features are the master cylinder and brake caliper, both made from very high-quality materials carefully selected by OTK Kart Group’s R&D Department to improve heat dissipation, significantly reduce brake-fluid temperature and provide drivers with consistent braking feel. One of the updates introduced with the “S” evolution is the adoption of a 180 mm floating brake disc, which makes braking more effective and consistent over time while also helping to reduce brake pad wearing.
The BWZ braking system was developed as part of the same project that led to the creation of the BWD system for Direct Drive classes, and is specifically designed for shifter categories. Its main features remain unchanged, with a master cylinder and rear brake caliper following the same design philosophy as the single-speed version. The brakeforce distributor and front calipers have also been revised compared with the previous version, both in their forged and machined components. They now feature an innovative design, in line with the master cylinder and rear caliper, with optimized fins and thicknesses that further improve heat dissipation and structural rigidity. The BWZ version also uses a 180 mm diameter rear brake disc.
The BWZ braking system was developed as part of the same project that led to the creation of the BWD system for Direct Drive classes, and is specifically designed for shifter categories. Its main features remain unchanged, with a master cylinder and rear brake caliper following the same design philosophy as the single-speed version. The brakeforce distributor and front calipers have also been revised compared with the previous version, both in their forged and machined components. They now feature an innovative design, in line with the master cylinder and rear caliper, with optimized fins and thicknesses that further improve heat dissipation and structural rigidity. The BWZ version also uses a 180 mm diameter rear brake disc.
Aerodynamics play an increasingly important role in karting. For this reason, OTK Kart Group’s R&D Department has devoted particular attention to this area, continually working to develop innovative solutions validated through a combination of CFD computer simulations, wind-tunnel testing and, finally, on-track tests. The M11 fairing kit, compliant with current FIA regulations, is the result of this development process. It includes a front number panel spoiler and a front bumper, both featuring a new design, paired with M10 side bumpers.
Aerodynamics play an increasingly important role in karting. For this reason, OTK Kart Group’s R&D Department has devoted particular attention to this area, continually working to develop innovative solutions validated through a combination of CFD computer simulations, wind-tunnel testing and, finally, on-track tests. The M11 fairing kit, compliant with current FIA regulations, is the result of this development process. It includes a front number panel spoiler and a front bumper, both featuring a new design, paired with M10 side bumpers.
The new TDX stands out not only for its many updates but also for several established features. These include OTK Kart Parts’ fully adjustable pedals which, together with the inclined steering-wheel hub, ensure an optimal driving position and quick, easy adjustment of the seating position. The steering wheel itself remains unchanged: the HGS model is retained, featuring a high-grip covering that significantly reduces effort while driving. This combination of components allows each driver to achieve a driving position tailored to their individual needs.
The new TDX stands out not only for its many updates but also for several established features. These include OTK Kart Parts’ fully adjustable pedals which, together with the inclined steering-wheel hub, ensure an optimal driving position and quick, easy adjustment of the seating position. The steering wheel itself remains unchanged: the HGS model is retained, featuring a high-grip covering that significantly reduces effort while driving. This combination of components allows each driver to achieve a driving position tailored to their individual needs.
Like the TG17 TS, the TDX S in its DD2 version adopts HFZ stub axles and the BWZ braking system with the new 180 mm diameter floating brake disc. Specific to this chassis version is the removable mounting system for the exhaust support.
| OK | KZ | DD2 | |
|---|---|---|---|
| FRAME MATERIAL | Molybdenum chrome steel | Molybdenum chrome steel | Molybdenum chrome steel |
| TUBES Ć | 32 mm | 32 mm | 32 mm |
| WHEELBASE | 1045 mm | 1045 mm | 1045 mm |
| AXLE Ć | 50 mm with CIK-FIA stamp | 50 mm with CIK-FIA stamp | 40 mm |
| BRAKING SYSTEM | BWD with stub axles evolution type and DOT 5.1 lubricant | BWZ with stub axles evolution type and DOT 5.1 lubricant | BWZ with stub axles evolution type and DOT 5.1 lubricant |
| INCLUDED ACCESSORIES | Magnesium components, MXJ wheels, front torsion bar, standard aluminium pedals | Magnesium components, MXJ wheels, front torsion bar, standard aluminium pedals | Magnesium components, MXJ wheels, front torsion bar, standard aluminium pedals |
| BODYWORKS | M11 spoiler M11 front spoiler with CIK-FIA homologated connections M10 fairings | M11 spoiler M11 front spoiler with CIK-FIA homologated connections M10 fairings | M11 spoiler M11 front spoiler with CIK-FIA homologated connections M10 fairings |